Aircycle 4.1 HRV Filter Set (AM 90-02-238) | Contains 2 x Individual Filters
Product Code: AR 90-02-238
Wire frame, polyester media (G3)
Rubber, easy-pull tabs
Dimensions: H 540mm x W 180mm x D 3mm
NOX50
The Brookvent NOX50 is a system which works hand in hand with mechanical extract ventilation (MEV) units, and has been designed specifically to remove outdoor pollutants from the air – most particularly particulate matter, and nitrogen dioxide, which can be drawn in from outdoor air by mechanical ventilation systems. The NOX50 is a nitrogen dioxide mitigation solution that is perfect used in conjunction with Mechanical Ventilation Heat Recovery (MVHR) in areas where the outdoor air goes beyond target concentrations of nitrogen dioxide, filtering these harmful gases and particulates out of the fresh air.
$427.69 + GST
- Nitrogen Dioxide Mitigation Solution
The NOX filter can be used in conjunction with MVHR (Mechanical Ventilation Heat Recovery) systems in buildings where outside air breaches target concentrations of Nitrogen Dioxide. By filtering air entering the building, residents and occupants are supplied with clean air in line with EU Directive Limits. The NOX Filter houses the tested Gas Filter Type 1 which can remove up to 90% of Nitrogen Dioxide, ensuring concentrations are brought below the Directive limits of 40 μg/m3 prior to entering the building.
- Particulate Matter Filtration (PM10)
The Gas Filter Type 1 is a uniquely designed combination air filter, fabricated to incorporate an internal PM10 Filtration Membrane filtering up to 90% of PM10 particulates that enter the NOX Filter.
Related Products
The Brookvent Aircycle 3.1 Digital range is the perfect choice of heat recovery ventilation system for medium to larger dwellings and apartments.
The Aircycle 3.1 Digital heat recovery ventilation system extracts the heat from your wet rooms such as bathrooms and kitchens, and infuses this heat into the fresh air, allowing for healthier, more comfortable conditions inside your residence for all inhabitants.
Offering up to 65 l/s at 150 Pa max airflow, down to 0.42 W/l/s specific fan power, a programmable 25% boost setting and 4 Airflow modes (Night, General, Boost, and Purge), amongst other benefits, this versatile system (it can be wall, ceiling or floor mounted) also offers up to 92% heat recovery efficiency- making it quite simply the best in its class. A remote digital control with status indication (sold separately) offers enhanced controllability packaged in a user-friendly interface, allowing for bespoke commissioning to fit each project.
Aircycle 3.1 Heat Recovery Ventilation System
The Brookvent Aircycle 3.1 heat recovery ventilation system offers unrivalled performance for medium to large apartments and dwellings. Versatile, it is offered with wall or floor mount options, including side or top duct connections, for ease of citing.
Pulling heat from the warm air in your wet rooms, such as kitchens and bathrooms, the Aircycle 3.1 then uses this heat to warm fresh air, and distribute this through the habitable rooms of your home. This mode of heating can significantly reduce the space heating demand of your home, whilst also delivering a healthier and more comfortable indoor environment for everybody living there.
The Aircycle 3.1 offers down to 0.37 W/l/s specific fan power, 100% variable fan speed control, easy access air filters, potentiometer or digital control models and many other features.
With 93% heat recovery efficiency, the Aircycle 3.1 is quite simply the most efficient heat recovery ventilation system in its class.
